Re: Trying to compile gateway firmware

Posted by Julius on
URL: http://ohs.356.s1.nabble.com/Trying-to-compile-gateway-firmware-tp10p14.html

Do I need to set any COM port settings (like baud rate or latency settings)? I am using FTDI programmer which looks exactly like in your web site and Arduino 1.6.9, however in the end I get the error:

avrdude: stk500_paged_load(): (a) protocol error, expect=0x14, resp=0x01
avrdude: stk500_cmd(): programmer is out of sync

(Just to clarify, send/receive leds blink pretty fast during the "upload" phase, but in the end i get the error)

EDIT: This is what I get trying to flash pre-compiled firmware using AVRDUDE: https://pastebin.com/Kn60jAtj

EDIT2: It seems that only the verification phase fails. I have changed some text in web ui and I can see those changes: https://imgur.com/a/I8f64