Re: Trying to compile gateway firmware

Posted by vysocan on
URL: http://ohs.356.s1.nabble.com/Trying-to-compile-gateway-firmware-tp10p15.html

It looks like the reading/verifying of written firmware does not receive correct data.

 I have similar behavior with one of my FTDI programmer, and I think that the problem is just Chinese copy of FTDI chip. There are many fake FTDI chips out there. The code is long so there is bigger chance to encounter error.

Try to upload it more then once, or use another Arduino with FTDI chip as programmer, or solder ISP header, and do upload via programmer in IDE.

Just curious, do you power the board externally when programming?

Adam