Gateway 2.0 web server issues

Posted by champson on
URL: http://ohs.356.s1.nabble.com/Gateway-2-0-web-server-issues-tp237.html

I've started to put together an alarm system using the Gateway 2.0 along with the default 1.2 version software.  It's a fantastic system and exactly what I've been looking for.
I have found a couple of issues, which I'll list below.

1. Web server stops responding.  After doing some fault-finding I found this seems to be related to a PIR sesnsor I have triggering the alarm.  This particular PIR has 4 wires going to it,  a 12v supply and then two NC alarm dry contacts.   At the Gateway end, I have connected one dry contact to the GND, and the other dry contact to the Zone 1 input.   Sometimes this correctly triggers the alarm, but most of the time it kills the web service.  I have configured this zone as an 'unbalanced input'.
Do I need to wire this some other way?

2.  The RTC seems to lose time (5 minutes over around 4 hours).  Maybe this is related to the issue above?